Endoscope Troubleshooting
-
Forward Water Jet not functioning properly
Forward Water Jet not functioning properly Possible Causes
- Forward water-jet channel is clogged
- Endo-irrigator pump not turned on or improperly connected (if applicable)
- Endo-irrigator water bottle is empty
- Forward water jet check valve is either damaged or improperly installed (this will cause back flow of fluid into tubing)
Possible Solutions
- If scope passes a leakage test, follow same procedures for clearing channel as described in the air/water channel section above
- Ensure that endo-irrigator pump is turned on and all components are properly connected.
- Ensure endo-irrigator water bottle is full
- Inspect forward water-jet check valve to ensure that it is properly installed, and not damaged
